So, your compression faucet is leaking, huh? Don't worry, you've come to the right place! As an HVAC expert with years of experience under my tool belt, I've seen my fair share of leaky faucets. Lucky for you, fixing a leaky compression faucet is usually a straightforward task that you can easily tackle on your own.
Before you roll up your sleeves and get started, make sure you gather the necessary tools for the job. You'll need an adjustable wrench, screwdrivers, replacement washers, and plumber's grease. Once you've got everything you need, follow these simple steps to fix that pesky leak:
First things first, you'll want to shut off the water supply to the faucet. Look for the shut-off valves under the sink and turn them clockwise to stop the flow of water.
Use your screwdriver to remove the handle of the faucet. Once the handle is off, you'll have access to the inner workings of the faucet.
Locate the screw that holds the washer in place and remove it. Take out the old washer and replace it with a new one of the same size and shape. Applying a thin layer of plumber's grease to the new washer will help create a better seal.
Put the faucet handle back on and tighten the screw to secure it in place. Make sure everything is reassembled properly before moving on to the next step.
Once you've double-checked that everything is back in place, slowly turn the water supply back on. Test the faucet to see if the leak has been fixed. If you no longer see any drips, congratulations – you've successfully fixed your leaky compression faucet!
See, that wasn't so bad, was it? With a little bit of know-how and some elbow grease, you can tackle minor plumbing issues like a pro. If you ever find yourself in need of more HVAC tips and tricks, be sure to check back here for more expert advice. Happy fixing!
